Camera ecosystem
AI analytics for i-PRO cameras. On the i-PRO and Panasonic feeds you already run.
IntelliSee analyzes video from i-PRO cameras, formerly Panasonic security cameras, over standard ONVIF and RTSP streams, on an appliance at your site. Compatibility is confirmed camera by camera during a camera review, so you know which views are ready before anything is installed.
Camera ecosystem
- ONVIF or RTSP stream
- Event type
- Camera name
- Location
How it connects
How IntelliSee connects to i-PRO cameras.
Current i-PRO cameras list ONVIF Profile S, G, T and M, for example the WV-S2136L. IntelliSee reads each camera's stream address over ONVIF and uses that standard stream. Nothing is installed on the camera, and your existing VMS keeps recording as it does today.
1. i-PRO camera stream
Pick the stream to use on each camera in scope. ONVIF or RTSP access is set up with credentials your team controls.
2. On-site IntelliSee analysis
The stream is analyzed on an IntelliSee appliance at your site, not on the camera. You choose which detections run on which views.
3. Alerts to your team
Configured alerts reach your designated staff and, if you choose, systems such as InformaCast, Microsoft Teams, Slack, or a webhook. Your procedures decide what happens next.
A brand name alone does not establish compatibility. Each model, firmware version, and stream is checked in the review. Read how IntelliSee works.
What it detects
Detections you can configure on i-PRO views.
Security events
Visible, drawn firearms, perimeter and unauthorized access, rooftop intrusion, loitering, and vehicles in areas you define.
Safety events
A person down after a fall, slip risk from visible spills, and visible smoke or fire.
Policy and operations
Crowd gathering and cell phone use in areas where your policy calls for attention.
Every detection is visual, so it depends on what the camera can actually see. IntelliSee detects visible, drawn firearms; it does not detect concealed weapons or knives. It does not use facial recognition. Detection types are chosen per view, not switched on across every camera.
Running i-PRO or Panasonic cameras today? Bring your camera list and two or three priority views, and we will help you pick a practical first group.
Discuss your i-PRO camerasCamera review
What to check in an i-PRO camera review.
| Item | What to bring | What the review confirms |
|---|---|---|
| Camera inventory | Model numbers (WV- part numbers), firmware versions, locations, and the VMS in use. | Which cameras and stream paths go into the first group. |
| Stream access | Whether ONVIF is enabled, which stream to use, and an account for the appliance. | Working, authenticated stream access, with the stream address read from the camera over ONVIF. |
| Resolution and field of view | Stream resolution, frame rate, codec, mounting height, and day and night sample views. | Which detections each view can reasonably support, and where a view needs adjusting. |
| Network | VLAN layout, the appliance location, firewall rules, and current bandwidth on camera segments. | An approved route from each camera to the appliance without disturbing recording. |
| Alert ownership | Who receives alerts, backup contacts, and any InformaCast, Teams, Slack, or webhook destination. | A tested path from detection to the right people. |
i-PRO product pages list ONVIF profile support per model, such as Profile S, G, T and M on the WV-S2136L. Older Panasonic WV models documented RTSP paths in the form /MediaInput/h264/stream_1, while current models are best read over ONVIF. Check the documentation for your exact model and firmware, or look up a model in the camera compatibility checker.
Before your camera review
i-PRO questions
Does IntelliSee work with every i-PRO camera?
Most i-PRO and Panasonic IP cameras publish ONVIF and RTSP streams, but support is confirmed per model, firmware, and view during the camera review. A camera that streams well can still have a view that does not suit a given detection.
Is this a joint product with i-PRO?
No. IntelliSee works with i-PRO cameras over standard ONVIF and RTSP streams. There is no joint program with i-PRO, and nothing is installed on the camera.
Do older Panasonic cameras work?
Often, yes. i-PRO was formerly Panasonic's security business, and many Panasonic WV IP cameras publish RTSP streams. Older models are checked for resolution and view quality, since detection depends on what the camera can see.
Do we have to replace our NVR or VMS?
No. IntelliSee reads a stream alongside your existing recording. The review confirms the camera can serve the extra stream without affecting what your NVR or VMS records.
What happens when an alert fires?
The alert goes to the staff you designate, with the event type, camera name, and location. It can also route into Singlewire InformaCast, AtlasIED, RapidSOS, Microsoft Teams, Slack, Google Chat, or a webhook. IntelliSee does not call 911, dispatch responders, lock doors, or start a lockdown, and there is no monitoring center reviewing alerts for you. Your own procedures decide the response.
How fast are alerts?
Analysis runs in real time on the on-site appliance, and alerts are designed to reach your staff within seconds of a detection. Delivery depends on your network, the stream, and each destination, so it is tested during setup.
How do we get started?
Start small. Pick a few cameras covering a defined need, such as a person down in a stairwell or after-hours activity at a loading dock. Confirm a stable stream, evaluate the views in normal lighting and traffic, test alert delivery and backup contacts, then record the approved views and who retests after camera, firmware, or network changes.
Start with a camera review
Keep your i-PRO cameras. Add detection where it matters.
Share your camera list, the areas you worry about most, and who should hear about an event. We will tell you which views are ready and what would need to change.
